Startseite/Home

 

Pumpen, und Reinigungs-Programm sowie Ersatzteile der Bilgepumpenfirma Lovett.

 

Lieferzeit: mehrere Wochen

Lovett Pumps Cut out

900 Model Automatic Bilge Pump

900 GPH (3497 LPH) Capacity

900–6 VAM (6 volt)
900–12 VAM (12 volt)
900–24 VAM (24 volt)
900–32 VAM (32 volt)

  • UL-listed
  • Ignition-protected
  • Built-in automatic float switch (contains no mercury)
  • Low 4-amp draw (12 volt)
  • Double-insulated drive design will not allow stray current leakage into bilge
  • Monel drive shaft
  • Bronze bearings
  • Tinned & sealed copper cable
  • Uses 3/4" diameter hose
  • Available in 6, 12, 24 and 32 volts

 

Lovett 900

1200 Model Automatic Bilge Pump

1200 GPH (4542 LPH) Capacity

1200–12 VAM (12 volt)
1200–24 VAM (24 volt)
1200–32 VAM (32 volt)

  • UL-listed
  • Ignition-protected
  • Built-in automatic float switch (contains no mercury)
  • Low 4-amp draw (12 volt)
  • Double-insulated drive design will not allow stray current leakage into bilge
  • Monel drive shaft
  • Bronze bearings
  • Tinned & sealed copper cable
  • Uses 111/8" diameter hose
  • Available in 12, 24 and 32 volts
1200 Bilge Pump

Automatic Shower Sump Pump

Use in draining shower pans installed below the water lines. Housed in a plastic sump, the Automatic Shower Sump Pump features the same Lovett quality as all our pumps. This pump has a large intake filter screen that is removable without tools for easy cleaning with a 3/4" diameter discharge connection.

12VSS – 12 volt Shower Sump Pump
24VSS – 24 volt Shower Sump Pump
32VSS – 32 volt Shower Sump Pump

  • UL-listed
  • Ignition-protected
  • Built-in automatic float switch (contains no mercury)
  • Clear acrylic tank
  • Removable brass screen for easy cleaning
  • 900 GPH (3407 LPH) capacity
  • Low 4-amp draw (12 volt)
  • Monel drive shaft
  • Bronze bearings
  • Tinned & sealed copper cable
  • Uses 3/4" diameter hose
  • Available in 12, 24 & 32 volts
Shower Sump Pump

Pump Repair Kit and Replacement Parts

The Lovett pump is the only submersible bilge pump that is field-serviceable with a full complement of spare parts available.

 

Pump Repair Pump Repair

Item #3200
2 Belts
Gasket
Automatic Microswitch
Instructions

 

Replacement Drive Belt Kit Replacement Drive Belt Kit

Item #3201
2 Belts
 

Pump Drive Repair Kit Pump Drive Repair Kit

Item #3202
2 Belts
Gasket
Automatic Microswitch
Bearing Tube
Monel Shaft
Pulley
Plastic Cam Ball
Instructions

Pump Motor Repair Kit Pump Motor Repair Kit

Item #3203 – 12 volt
Item #3204 – 6 volt
Item #3205 – 24 volt
Item #3206 – 32 volt
Includes parts
from 3202 plus:
6, 12, 24 or 32 volt Motor
Motor Mounts
Wire Connector
Wire Insulation Tube
Terminal
Rubber Disk
 

Other Replacement Parts

Item # 900-2132 – 3/4" Copper Discharge Tube
Item # 2149 – 90 Degree Discharge Tube
Item # 3207 – Fastener Kit
Item # 3208 – Bilge Pump Float Kit
(900, 1200, 2000)
Item # 3210 – Cable Kit

Shower Sump Pump Replacement Parts

Filter Screen

 
Shower Sump Pump
Filter Screen

Item #2148

Tank Lid Shower Sump Pump
Tank Lid

Item #2155

Replacement Sump Pump

12VSSRP – 12 volt Replacement Pump w/Screen
24VSSRP – 24 volt Replacement Pump w/Screen
32VSSRP – 32 volt Replacement Pump w/Screen
Replacement Pump Unit for the Lovett
Sump Pump Shower Sump includes new:

  • Filter screen
  • Built-in automatic float switch
  • Tinned & sealed copper cable
     
Other Replacement Parts

Item # 2147 – Clear Plastic Shower Tank with Inlet
Item # 2159 – 3/4" Discharge Tube
Item # 3209 – Shower Sump Pump Float Kit

 

Lovett 900 Pump Instructions

The following is a complete list of instructions for the Lovett 900 Automatic Bilge Pump.

Read these instructions before installation!

FAILURE TO FOLLOW THE LISTED INSTRUCTIONS WILL VOID YOUR WARRANTY

Lovett 900 Automatic Bilge Pump
Installation Data and Description

The Lovett pump is unique in its design. It uses only one gasket in its construction. There are no seals around moving parts to wear and leak. The principle of air compressed over water, in a chamber open at the bottom and closed at the top, effectively prevents bilge water from entering the motor and switch components, unless the pump is submerged to a depth of more than 28 feet or is upset while submerged, thereby losing the compressed air in the air lock, through which the electric cable and pump shaft enter the interior casing. Freezing will not damage the plastic parts of this pump. Call (513) 738-2170 or (800) 673-5976 if you have any installation questions.

FASTEN PUMP SECURELY TO HULL as near level as possible. Maximum installation angle for satisfactory results –10 degrees in any direction to permit normal operation when boat is heeling.

FASTEN PUMP DOWN SO THAT IT CANNOT UPSET

Installation

Run the 3/4" ID discharge hose from the pump as straight as possible to through-hull fitting, mounted at least 10 inches above the waterline. DO NOT use a check valve. DO NOT trap discharge line. DO NOT run two pumps into one discharge.

Connecting the pump to a smaller ID discharge hose will greatly reduce its capacity. Wire the pump in accordance with "Fire Protection Standards for Motor Craft" N.F.P.A. #302; USCG Sub Part I, 46CFR, Part 183, and all applicable ABYC standards.

Fuse and AWG wire size to 40 feet from pump to power supply
12 volts – 5 Amp Fuse - #14 Wire 24 and 32 Volt – 3 Amp Fuse - #14 Wire 6 Volt – 8 Amp Fuse - #10 Wire

Automatic switch will burn out immediately if the pump wires are not connected as they are marked. Double-check your boat wiring before making connections. Test with voltmeter or light, not the pump. Make all connections well above bilge water level, tape all connections, and secure wire to prevent chafing. DO NOT connect automatic to one battery and manual to another. Automatic requires 2 inches of water to turn on.

Wiring Diagram
 

Capacity
900-6VAM
6 Volts 668 GPH 0 Head
6 Volts 470 GPH 3 Ft. Head
900-24VAM
26.2 Volts 887 GPH 0 Head
24 Volts 780 GPH 0 Head
24 Volts 574 GPH 3 Ft. Head

 
900-12VAM
13.2 Volts 900 GPH 0 Head
12 Volts 782 GPH 0 Head
12 Volts 550 GPH 3 Ft. Head
900-32VAM
35.2 Volts 900 GPH 0 Head
32 Volts 782 GPH 0 Head
32 Volts 550 GPH 3 Ft. Head